Chip compressor "MAS-100"
Chips are compressed and solidified to reduce volume, contributing to production efficiency and beautification of factories!
Chips, which require significant post-processing, can be reduced to as little as 1/50 in volume and solidified to promote efficient production, factory optimization, and effective use of resources. Combined with a crusher, the processing capacity can be expanded 2 to 4 times. It is compatible with a wide range of metals such as iron, copper, aluminum, stainless steel, and gunmetal.
【Main features】
■ Chips are solidified under pressure of 100 tons, so even hard-to-solidify steel grades can be compacted
■ Volume reduction rate of 1/5 to 1/50
■ Cutting oil recovery rate is over 95%, enabling efficient reuse of coolant
■ Compaction time can be reduced by 3 to 4 times by combining with a crusher
■ Power-saving design with automatic shutdown upon completion of compression work
■ Easy maintenance design
■ As an option, a safety control function can be implemented that prevents the main unit cover from opening and closing during operation
【Main Specifications】
・Compression capacity (KN): 980
・Briquette diameter (mm): Φ80
・Compressed surface pressure (MPa): 201
・Motor capacity (KW)
- Hydraulic motor for compression: 7.5
- Motor for vertical screw: 0.75
- Motor for horizontal screw: 0.4
- Motor for lubricating oil: 0.01
・Power supply: 3Ph AC200/220V/50/60Hz
・Power receiving capacity (KVA): 13
・Machine weight (Kg): 1860
■ Chips are solidified under pressure of 100 tons, so even hard-to-solidify steel grades can be compacted
■ Volume reduction rate of 1/5 to 1/50
■ Cutting oil recovery rate is over 95%, enabling efficient reuse of coolant
■ Compaction time can be reduced by 3 to 4 times by combining with a crusher
■ Power-saving design with automatic shutdown upon completion of compression work
■ Easy maintenance design
■ As an option, a safety control function can be implemented that prevents the main unit cover from opening and closing during operation
【Main Specifications】
・Compression capacity (KN): 980
・Briquette diameter (mm): Φ80
・Compressed surface pressure (MPa): 201
・Motor capacity (KW)
- Hydraulic motor for compression: 7.5
- Motor for vertical screw: 0.75
- Motor for horizontal screw: 0.4
- Motor for lubricating oil: 0.01
・Power supply: 3Ph AC200/220V/50/60Hz
・Power receiving capacity (KVA): 13
・Machine weight (Kg): 1860
▲ Machine dimensions (mm)
Contact Us
Please feel free to contact us via the form below.
Loading...