Projector Nikon｜observe and measure the shape and dimensions of the object to be inspected by projecting it at an accurate magnification.

Measuring Instrument

Projector Nikon

observe and measure the shape and dimensions of the object to be inspected by projecting it at an accurate magnification.

In addition to a wide measuring range, the built-in digital protractor and digital counter provide excellent operability. The lineup is selectable according to the size of the effective screen diameter.

■main specifications

【V-12B】
＜projection screen＞
effective diameter of projection surface：Φ305mm、made of ultrafine glass, with engraving crossharis
V-12BDC/V-12BD：rotatable screen with digital protractor rotating knob
360 degree rotatable（digital reading）　
V-12BSC/V-12BS：fixed screen
projection lens：5X、10X、20X、50X、100X、200X （front lens parfocal） 3-turret mount
magnification accurary：transmitted illumination：±0.1%、reflected lighting：±0.15% （excluding 200X）
stage：MHS 10X6B、MHS 8X6B、 MHS 6X4B、MHS 4X4B、MHS 2X2B、slidable stage
＜lighting equipment＞
transmitted illumination：telecentric illumination（switching in 4 steps with transmitted illumination zooming condenser lens）
reflected lighting：vertical reflection illumination with half-mirror built in
light source：24V150W halogen lamp, light source brightness H/L switchable
maximum height of test object：100mm（when using MHS 10X6B/MHS 8X6B：70mm）
body dimensions：410(W)×650(D)×938～1038(H)mm
(hood attached：410(W)×700(D)×970～1070(H)mm about 80kg
indication accuracy：3.0+L/50um　after correction、the load mass is 1kg or less
3.5+L/50um with on-site correction when the rotary table is mounted（excluding MHS 2X2B）

【V-20B】
＜projection screen＞
rotatable screen, effective diameter of projection surface：Φ500mm 、made of ultrafine glass, with engraving crosshairs
center height：1403mm、angle of rotation：360°、rotation angle minimum reading：1°
built-in digital protractor
projection lens：5X,10X,20X,50X,100X（front lens parfocal） 3-turret mount
magnification accuracy：transmitted illumination：±0.1%、reflected lighting：±0.15%
each projection lens's transmitted illumination is zoom-type telecentric illumination
stage：MHS 10X6B,MHS 8X6B,MHS 6X4B,MHS 4X4B,MHS 2X2B,slidable stage
＜lighting equipment＞
transmitted illumination：telecentric illumination（zoom switching）
reflected lighting：vertical reflection illumination with half-mirror built in
light source：24V150W halogen lamp, light source brightness H/L switchable
maximum height of test object：150mm
body dimensions：570(W)×615(D)×1900(H)mm
(hood attached：1200(D)×2000(H)mm about 260kg
indication accuracy：3.0+L/50um　after correction、the load mass is 1kg or less
3.5+L/50um with on-site correction when the rotary table is mounted（excluding MHS 2X2B）

Catalog Download

EN-RyokoshaVE-Nikon Profile Projector

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name Required

Phone number Required

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.