Report on the ‘Die & Mold Machining Solution Seminar’ Jointly Hosted by Sodick (Thailand) and CGS Asia｜Machining Centers / EDM

04/09/2024

Samurai Asia Editorial Department

On July 12, 2024, Sodick (Thailand) and CGS Asia held a joint seminar. The seminar was tailored for users engaged in mold processing. During the seminar, they introduced the recommended products and software from both Sodick and CGS, highlighting their features and practical applications.

Sodick Thailand

▲ Scene from the seminar

Sodick introduced the convenient control functions featured in their machining centers, along with the latest machining center, the "UX450L."

■ SEPTune
Software that automatically generates optimal parameters by selecting tool length, tool neck length L/D, machining range, and feed rate according to the machining purpose.
Sodick Thailand

■ EFtune
Software that calculates the optimum cutting feed rate (F value) in NC programs. It enables even operators with limited knowledge or experience to easily determine machining conditions in a short time.

เครื่องTS50L, ซอฟต์แวร์ CAM-TOOL

▲ Machining center "TS50L" on display in the showroom

■ Motion Expert
A system that supports the drive control of machines, reducing errors during machining and improving the accuracy and stability of operations. By controlling the movement of the axes, it reduces energy consumption by 20% and shorten processing time. It can easily replace outdated motor drives.

■ Linear Motor Drive Machining Center "UX450L"
The latest machining center, which began full-scale sales in Thailand in 2024, features proprietary linear motors on the XYZ axes, making it suitable for high-speed, precision machining.

Features of Sodick's linear motors
・Positioning at the 1nm level for precision machines, high-speed machines capable of speed exceeding 100 meters per minute, and high-acceleration machines capable of accelerations exceeding 5G.
- World-class cooling characteristics
・High response and high speed are achieved in combination with a motion controller.

Sodick × CGS's Initiatives to Contribute to the Development of Thailand's Manufacturing Industry

CGS Asia and Sodick (Thailand) are dedicated to supporting and developing the manufacturing industries in Thailand and ASEAN. Collaborations like this joint seminar exemplify their efforts to introduce new technologies to manufacturing sites in Thailand.

"This seminar was truly memorable. Not only did we gain new knowledge, but we also had the opportunity to engage directly with industry peers who share similar interests and goals. Receiving insights from industry experts proved to be both educational and motivating. I believe this CGS × Sodick seminar was highly beneficial and of excellent quality for the participants. We would be honored to continue participating in such engaging seminars in the future."
— Mr. Patchara, Sodick Thailand

▲ Sodick and CGS staff members who participated in this seminar

If you are looking for Sodick's machine tools (EDM, machining centers, plastic injection molding machines, metal 3D printers) and other products in Thailand, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.