Arithmetic processing speed is 3 times faster than previous NC Units. High-speed milling machines that embody 3D shapes truly with the resolving power in 1 Nano unit.

Machining Center

UH Series (Linear Motor Drive / Ultra High-speed Milling Center)

Arithmetic processing speed is 3 times faster than previous NC Units. High-speed milling machines that embody 3D shapes truly with the resolving power in 1 Nano unit.

It is equipped with original linear motor drive equipped on all 3 axes, in-house developed motion controller and PWM amplifier. By these functions, each axis control cycle speeds up and high-precision and high-speed milling process is realized. High-quality surface finish is conducted in the fine precision area along with the improvement of characteristics of resolution control It also contributes to the increase in speed of cemented carbide direct machining by diamond tools and quality improvement of mirror finish of optical lends. If you are interested in this product in Thailand, please contact Sodick (Thailand).

【Product features】

■A wide variety of spindles developed in-house
To meet the various processing needs in fine precision area, you can configure settings by choosing from a lineup of four HSK shrink fit type dual face contact spindles. The spindles suppress vibration and core deflection to provide good balance between "rotation-torque characteristics" and high rigidity.

■Incorporates the new and advanced NC Unit "LN4X"
Original motion controller and PWM amplifier improves speed performance for all axes control cycles. With the improvement in the responsiveness of the driver servos and improvement of characteristics of 1 nm* resolution control, higher quality surface finish is achieved in the fine precision area. *1 nm (nanometer) = 1/1,000,000,000 m

■Linear technology from Sodick leading the world
Linear motor drives developed and manufactured in-house having over 20 years of achievements and trust, are equipped as standard to all three axes. It established the perfect balance by full linear and demonstrated superiority of high-speed milling which realizes high precision and high quality in high speed.

■"MotionExpert®-S" and "MIEMMERCE" included as standard to meet IoT requirements
"MotionExpert®-S" is high-precision simulation software that allows estimates of machining times and displays a distribution of machining speeds. We have prepared IoT software "MIEMMERCE" that allows centralized control of machine operating status from remote locations.

■Each axis stroke X×Y×Z
UH430L：420×350×200㎜
UH650L：620×500×300㎜

Please refer to the catalog for the detailed information about product specifications.

Catalog Download

Sodick_Machining Center UH series (EN, 6.63MB)

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.