Ideal for machining large EV parts such as battery trays! Large-size parts machining center ‘GIGAFEEDER’

17/10/2023

Sugino Machine India Pvt. Ltd.

Sugino Machine India sells products and provides after-sales service throughout India from its three bases in Gurgaon, Bangalore, and Mumbai. This article introduces its new product 『GIGAFEEDER』, a large-size parts machining center that has been on the market since June 2023.

A machining center ideal for machining large aluminum die-cast parts with space-saving and large machining area

GIGAFEEDER is a large-parts machining center that can be equipped with up to six spindles and is based on Sugino Machine's drilling/tapping unit “SELFEEDER”. Developed for the purpose of cutting large EV parts (aluminum frame parts and battery trays), this single machine can perform drilling, tapping, and even milling using cutters and end mills.

【[Features of the large-size parts machining center “GIGAFEEDER”】
✔ Achieves space savings while having a wide machining area that can accommodate large EV parts
The standard four horizontal spindles have a machining area of 1,850 mm on the X axis, 1,450 mm on the Y axis, and 350 mm on the Z axis, suitable for machining large EV parts. Compared to large-size machining centers, which require workpieces to be placed horizontally for machining, the installation space is significantly smaller, contributing to space savings on production lines.

▲ Internal image of GIGAFEEDER equipped with four spindles

▲Comparison of installation space with large-size machining centers

✔ Overwhelming productivity achieved through simultaneous machining with up to 6 spindles

✔ Various module configurations enable optimum line layouts to match the conditions
The module configuration can be changed to best suit the cycle time, conveyance system, and production line layout required by each factory. Even if the parts to be produced change in the future, by re-combining the modules, the equipment can be easily converted, making it a versatile and highly flexible.

Leave the machining of large EV parts to GIGAFEEDER!

Currently, most manufacturing sites for large EV parts use a combination of large-size machining centers and robots. However, there are probably many workplaces that have some issues, such as installation costs, machining accuracy, and installation space. The GIGAFEEDER can solve all of these problems at once. Furthermore, even if the parts to be machined change in the future, a single unit of this highly versatile equipment can flexibly accommodate such changes.

▲ Comparison chart of equipment for large EV parts machining

	GIGAFEEDER	Large-size machining center	Robot machining equipment
Machining accuracy	〇 Ensure machining accuracy with orthogonal axes	◎ Accuracy can be achieved easily, but in the case of aluminum die-casting, there are cases of excessive quality.	△ Difficulty in orthogonal motion. There is also a problem with the accuracy of the horizontal drawing machining.
Number of units required	6	26	30
Cost	◎	△	◯
Installation space	Small	Large	Large

There are almost no similar machining centers around the world that specialize in cutting large EV parts, making the GIGAFEEDER a highly unique product. Since its launch, the number of inquiries from customers in India has been steadily increasing. Specifications can be arranged to suit the workpiece and conditions, so please feel free to contact us.

If you are looking for a machining center that specializes in cutting large EV parts in India, or if you are interested in other industrial machinery manufactured by Sugino Machine, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.