XYT-51 (Multi-tasking lathe with gantry loader)

A multi-tasking lathe that meets the needs for integrated machining processes from raw materials to finished products. Supports flexible automation line configuration!

The "XTY-51" is a multi-tasking lathe that meets the need for integrated machining processes from raw materials to finished products, strongly supports flexible automated line configuration for flange work. In addition, this machine, which has improved machining capability by enlarging the through-hole diameter of the first spindle and increasing the motor output, can handle heavy-duty cutting of large-diameter bar materials. We realize machining that matches the customer's production style.


■ Main features
・Responding to the needs for integrated machining from raw materials to finished products
・Newly installed gantry loader supports flexible automated line configuration for flange work
・Increased through-hole diameter of the first spindle and higher motor output improve machining capacity
・Heavy-duty cutting of large-diameter bar materials is supported
・Bolt-mount type with excellent reproducibility is adopted for applicable holders
・Gear machining is also possible with the hobbing unit
・Up to 48 turning tools and 24 rotary tools can be mounted.
・A wide variety of tooling types are available to meet various machining requirements
・Improved maintainability and ease of setup for high-mix, small-lot production
・Suppress accumulation and sweep of chips as well as improve maintainability
・Improved spindle performance contributes to reduced setup work

■ Specifications
<Chuck size: 6 inches>
Spindle bearing inner diameter: φ100 (1st spindle), φ85 (2nd spindle) mm
Spindle speed: Max. 5,000min
Tool post type: 12-station turret, 24ST, BMT45
Maximum stroke: X1:162.5, Z1:500, Y: ±35, X2:170, Z2:500, A:550 mm
Rapid traverse rate: X1:18, Z1:30, Y:12, X2:18, Z2:30, A:30m/min
L × W: 2,995 × 2,250mm
Controller: TAKAMAZ & FANUC 32i-B

<Chuck size: 8 inches>
Spindle bearing inner diameter: φ120 (1st spindle), φ100 (2nd spindle) mm
Spindle speed: Max. 4,000min
Tool post type: 12-station turret, 24ST, BMT55
Maximum stroke: X1:162.5, Z1:500, Y:+40-35, X2:170, Z2:500, A:550
Rapid traverse rate: X1:18, Z1:30, Y:12, X2:18, Z2:30, A:30m/min
L × W: 3,000 × 2,163mm
Controller: TAKAMAZ & FANUC 32i-B

Contact Us

Please feel free to contact us via the form below.
Loading...