Released ‘MCR-F180’, a compact fixed type 2-dimensional code scanner that can read any 1D / 2D codes

05/05/2021

Wacharawara Kanklin（Aum）

Sales Executive

MCR-F180 2D code scanner

▲ a compact fixed type 2-dimensional code scanner "MCR-F180"

MARS TOHKEN SOLUTION has been making various 2D code readers for over 20 years.

In recent years, various types of direct parts marking have increased, and the interface has also diversified. In order to support them, scanners (code readers) have been steadily increasing in size.

MARS TOHKEN SOLUTION is pleased to announce the release of a simple and tough, compact, fixed type 2-dimensional code scanner "MCR-F180" in Thailand, with only the necessary functions while supporting various applications in traceability.

MCR-F180 code reader

▲MCR-F180 (left) and a variation of the fixed type code readers

Features of the compact fixed type 2-dimensional code scanner "MCR-F180"

MCR-F180 2D code scanner

▲ Reading a barcode (1D code)

MCR-F180 2D code scanner

▲It easily reads a shaded 2D code engraved on products.

① Two types of high-intensity illumination to enable reading of various workpieces

White illumination: Ideal for paper and materials with little reflection
Red illumination: Ideal for metals, resins, substrates, etc.

Equipped with a high-resolution 1.2-megapixel CMOS, it clearly captures difficult-to-read codes and symbols.

MCR-F180 2D code scanner

▲ Equipped with a high-brightness LED light

② Reading software with enhanced reading speed

Equipped with a new logic specialized for mobile reading. It reads 1D / 2D codes moving in lines and rotating workpieces with high speed and high accuracy.

MCR-F180 2D code scanner

▲ Capable of reading rotating codes

◆Correspondence code
・Code39
・Code128/GS1-128（EAN128）
・Codabar（NW7）
・ITF（Interleaved 2 of 5）
・UPC/EAN/JAN
・GS1 DataBar（RSS）
・Code93
・Data Matrix（ECC200）
・CompositeCode
・QR Code/Micro QR Code
・PDF417/MicroPDF
・AztecCode

③ Small but tough body + simple design

External dimensions: 60 mm (H) x 45 mm (W) x 35 mm (D) (excluding protrusions)
Weight: 220g / 235g (depending on the model)
IP67
Operating temperature: 0℃ to 40°C
Storage temperature: -20°C to +60°C
Vibration resistance ... 10 to 55Hz Amplitude 1.5mm (full width) / X, Y, Z for 2 hours in each direction

Lightweight and compact, but IP67!
It is designed to withstand use in hot places such as factories in Thailand.

MCR-F180 2D code scanner

▲ There are two types of models, straight and right angle, depending on the cable mounting direction.

④ Easy position adjustment + auto tuning function

Using the newly installed object detection function, the pointer informs you of the appropriate distance. In addition, the optimum reading adjustment can be performed with a single push.

⑤ Free setting software is also available!! ︎

MCR-F180 2D code scanner

We provide free reading setting software such as "MCRConfig2", a software for Windows that allows GUI operation of various settings and tables.

・ Auto tuning (16 types of table settings are possible)
・ LAN settings
・ PLC link setting (No PLC program required!)
・ Print quality setting (displays values of printing/poor printing)

If you are considering implementing various types of code readers and automatic identification systems in Thailand, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.