Bits dramatically increase screw tightening efficiency｜Automation and special products are supported

24/04/2023

Koji Hashimoto

General Director

There is a growing momentum to implement screw tightening machines to automate manual screw tightening processes and improve productivity. However, if the performance of the bits and sockets that transmit the power to the machine is poor, it will not be able to fully demonstrate the performance of this wonderful piece of equipment.

In order to improve production efficiency with screw tightening machines, it is important to reduce the number of equipment troubles and shorten the work time. This article introduces the importance of bit selection and specialized Japanese manufacturers that produce high-precision products.

Are you choosing the right screw tightening bit?　

One of the most common problems in screw tightening is "poor fastening" caused by misalignment of the screw positions and the bit slipping from the cross-holes. In the early stages of implementing automated machines, the cause of such problems cannot be identified until some time has passed, because know-how on the effects of bit wear and compatibility with screw materials has not yet been accumulated. Basically, it is important that the screw can maintain the state when it is tightened, but the bit must repeatedly transmit the proper torque to the screw.

Therefore, it is important to pursue the best screw tightening bits for the screwdriver and screw used. Finding the optimal product will reduce equipment problems caused by poor fastening and lead to improved productivity.

Ohmi Seiki, a specialized manufacturer of screwdriver bits and sockets, supports special products

Ohmi Seiki Co., Ltd. is a specialized manufacturer of bits and sockets that can manufacture special products and small lots that screwdriver manufacturers cannot handle.

OHMI SEIKI CO., LTD.
A Japanese manufacturer specializing in screwdriver bits and sockets.
Specializes in manufacturing special products and automation, and can propose improvements to the screw fastening process.

■Features of Ohmi Seiki
◎ Abundant specialized know-how on bits
◎ Lineup that can be used for screwdrivers from various manufacturers
◎ Handle small lots of special products (from about 10 pieces)
◎ High precision that is ideal for automatic screw tightening machines
◎ Various suggestions for solving screw tightening problems

Ohmi Seiki's strength lies in its ability to propose special products that make use of its accumulated know-how. The company can make proposals for each customer in response to requests and consultations such as "If there was a product of this size and shape, it would be possible to dramatically improve (increase efficiency) ...". Its knowledge of materials, shapes, manufacturing methods, and heat treatment can solve various problems in screw tightening. In the field of automation, it has accumulated a wealth of solutions cultivated in the Japanese market, where robots are increasingly being introduced.

For those who are looking for Ohmi Seiki's bits in Vietnam 　

UENO is an authorized distributor of Ohmi Seiki in Vietnam. By contacting us for custom-made consultation, proposal, design, import, etc., we can consistently respond to your needs in Vietnamese or English. We will help you create a safe and efficient screw fastening environment.

We provide high-quality Japanese screwdriver bits. For customers in Vietnam, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.