The face plate can be exchanged by simple operation just by loosening the lock nut, eliminating the need for teaching, wiring and piping when exchanging the jig. In addition, six reed switch mounting grooves are provided, and the sensor used in the program can be switched. Manual exchange minimizes teaching points and saves start-up time for new work.

It is the successor model of our MR series and equipped with the highest class specifications despite its compact body. A large diameter worm wheel design allows for a high permissible cutting torque to achieve extra reed cutting. It can be installed without a clamp device, and the effective thickness is reduced, which improves chip sweeping. The compact built-in rotary joint can be selected from 4 ports, 5 ports, and 6 + 1 ports. High-pressure rotary joints can also be used to miniaturize jigs and speed up operation.

Immediately after the jaw molding, the grasping accuracy is 0.01mm T.I.R. or less! The grasping accuracy that exceeding the common sense of conventional standard chucks, it promises stable quality by reducing jaw lifting. No need to remold when changing the setup by using the optional special T nut! !

The exchange of jaw (claw) is necessary every time the work changes. Usually, this work is done manually, which takes time and effort. NTS-QM is the master jaw that solves this problem. Simply by attaching to the gripper body, jaw exchange is completed in just three steps. No tools are needed. This is the best solution for saving work time and increasing production efficiency.

Despite the compact design of powerful pneumatic clamping torque by triple disk method, it has realized high indexing accuracy and high rotation speed. It can be used at a wide range of machining centers. As an option, it can be equipped with a rotary joint. We also offer tables with T-grooves and combinations with chucks.

This is a two-stage grip type chuck where the jaw moves in parallel and grips the work piece,then pull donw and take a seat-confirmation. Different from the conventional style, the jaw does not protrude in the Z direction, so there is no interference with the work piece, making it possible to grasp narrow or intricate parts. In addition, since the gripping diameter is as large as the chuck's outer diameter, it can be used even for the inner diameter gripping specification, so it supports flexible processing. Excellent durability with dust proof and grease sealed structure! The jaws can be easily remolded by the customer himself, and it is suitable for mass production processing, introduction to automation lines, and production of various types and variable quantities.