NANO SEIMITSU: The origin of our Thai business is JIS fasteners (retaining rings). We are confident in our quality and price.

04/11/2020

Kazuaki Yada

Marketing & Purchasing Director

NANO SEIMITSU sales JIS Fasteners

NANO PRECISION was established in 2004 as a trading arm of the metal precision shaft manufacturer "FORTUNE CROSS (Thailand)". The first business we handled was sales of the JIS fastener JIS Fasteners (commonly known as E-RING and C-RING) that was assembled on a shaft manufactured by FORTUNE CROSS, considered to be a synergistic effect.

Mr. Oishi, the Managing Director, knew that Japanese-made fasteners were not competitive in price compared to those of local Thai companies. Therefore, we imported fasteners from several manufacturers that satisfied the conditions of ➀ quality control (conforming to JIS), ② mass production capability, and ➂ management reliability. In this way, the fastener sales business started with merchandise unique to NANO SEIMITSU.

Example of parts used by inserting and fixing the grooves on the shafts (FORTUNE CROSS shafts)

▲ Example of parts used by inserting and fixing the grooves on the shafts (FORTUNE CROSS shafts)

JIS fasteners from NANO SEIMITSU with price competitiveness in Thailand

At the beginning, the scheme was to repack fasteners imported from Taiwan in Thailand and deliver them to customers. However, at the request of a customer, we started to deploy the same product horizontally to factories in India, Indonesia, and Vietnam, and further by sending them to Mexico, which greatly improved our logistics management. Through this improvement, we have succeeded in differentiating ourselves from other companies in terms of price competitiveness and other aspects. (Mainly the following 3 points)
①Avoiding Thai tariffs on overseas exports
② Unification of import customs clearance for Thailand
③Contributed significantly to the decrease in unit price of transportation charges due to the increase in transportation volume.

Regarding the fastener business, "The greatest strength of our company is that ‘NANO TAIWAN (AGS)’ in Taiwan is acting as local eyes and ears on our behalf." (Mr. Oishi)

Flat fasteners

▲ Just below the company logo, from the left, President of AGS - Mr. Andes, President of FORTUNE CROSS - Mr. Hara, Managing Director of NANO SEIKI – Mr. Oishi (in 200X)

We are confident in the quality and price of our other products such as flat fasteners!

JIS flat fastener products have loose geometric tolerances (dimensional accuracy), so there should be no quality problems. JIS flat fastener products from NANO SEIMITSU have high quality and low unit price. In addition, the larger the size of iron and plated products, the more competitive the price. Although the unit price of the product is low, the quantity used is large, so it is also subject to cost reduction. If you are already using JIS fastener products, please contact NANO SEIMITSU for a phase estimate (price comparison).

■METALEX 2020 exhibition information

We will be exhibiting at METALEX 2020.
Exhibition contents: FORTUNE CROSS products / JIS standard press products / Various sorters (VIDEO) / LINE QC SPECIALIST

Nano at METALEX2020

If you are looking for JIS fasteners (retaining rings, flat plate fasteners, pressed products, E-RING, C-RING, SPRING PIN, E-type retaining rings, C-type retaining rings, spring pins, press standard products, parallel pins) in Thailand, please contact us using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.