'LINE QC SPECIALIST' Implementation Case Study | Automating quality improvement in manufacturing processes, eliminating defects and visualizing causes

15/05/2023

Samurai Asia Editorial Department

LINE QC SPECIALIST (hereinafter referred to as "LQS") is a quality control system developed by Nano Seimitsu to prevent defective products from being created in the manufacturing process. In this article, we will introduce a case study of TOHOKU MANUFACTURING (Thailand) CO., LTD (hereinafter referred to as "TMT"), which installed this system to improve quality and to make paperless of monitoring sheet..

Handwritten-sheets are difficult to determine the cause of the problem.

It is not easy to manage and maintain quality in the manufacturing process to prevent the production of defective products. Management with analog handwritten forms takes time and effort to determine the cause of defects. Many companies are probably struggling with these issues. TMT, an automotive parts processing and manufacturing company in Thailand, was one of them that faced the same problem.

＜Issues faced by TMT＞
・Wanted to reduce the manufacturing records in paper form
・Handwritten records that rely on human labor have inconsistencies in reliability.

Currently, the company has 50 NC lathes for precision parts machining. Four LQSs are responsible for process quality control of approximately 60% of these machines. Specifically, the LQSs are used to collect data during sampling inspections of parts machining, and as a tool for trend management and quality analysis at the site.

Production control, Automation Parts, Mass production, Nano Seimitsu Thailand

▲Trend management using LQS at the factory

Automates quality data measurement and monitoring and accelerates PDCA cycle
Improve quality and eliminate in-process defects

LQS was developed based on the concept of stopping the outflow of defective products at one-in-a-million (zero PPM) = "eliminating in-process defects" without automatic sorting of all products. The creation of this solution was only possible by a view point of Nano Seimitsu, which itself is also a mass-production manufacturer.

【Benefits of implementing LQC】
■ Automate manufacturing site monitoring
Automatically monitor three items that cannot be covered by visual inspection alone: "abnormalities of measuring instruments", "central standards and mass production standards", and "measurement locations and measurement frequencies after mass production".

■ Automatic input by digital measuring instrument and quality data judgment in real time
Real-time defect judgment enables immediate response to defects when they occur

■ Big data analysis of measurement data
Automatic database of measurement data enables quick and easy investigation of causes of defective products (operators, machines, tools, etc.) ⇒ Visualization of causes

Especially in the case of cutting machinings such as TMT, changes in quality due to tool wear and other factors can easily increase the defect rate, so daily trend management (monitoring) of machining quality is important. The key to building a manufacturing process that makes it difficult to create defects is to recognize defects as soon as possible, make improvements, and quickly implement the PDCA cycle. LQS is the best solution to achieve this.

Effective for paperless manufacturing and improved production efficiency
Ideal for factories that mass-production machining single parts

"For many years, we have been having problems managing manufacturing records in paper ledgers. Since introducing LQS, we have not only gone paperless, but also improved our production efficiency considerably by being able to immediately analyze and utilize the measurement data. We manufacture products with tight tolerances (tolerance range 10-70um), and since the implementation, we can check the results on a chart while measuring trends, making it easier to identify trends and variations in dimensions. We currently have four LQSs in place, but we plan to install three more this year to control the process of all of our NC lathes with LQS," said TMT factory manager Mr. Watanabe.

In terms of gradual improvement of process capacity through fixed-point observation of manufacturing records, it is expected to be particularly effective in continuous machining processes such as sites that mass-production machining single parts. This is a revolutionary solution that not only improves quality, but also leads to a highly productive factory where production is always optimized.

【Interview cooperation】
TOHOKU MANUFACTURING（Thailand）CO.,LTD
Established in 2011, the company manufactures precision automotive parts by cold forging and cutting. It has a factory in Pinthong Industrial Park 1. The company's strength lies in its ability to perform integrated processing from forging to cutting.

If you have any concerns about quality improvement or automation of mass-production machining of parts, or if you are facing challenges in eliminating defective or faulty products in Thailand, please contact us using the inquiry form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.