We are handling custom-made and made-to-order housings for storage such as in an industrial facility. We purpose to manufacture housings with a layout that can be freely managed, using materials that meet the customer's installation conditions. In addition to high-quality distribution boards and control panels, we also support electrical wiring inside the housing. If you are considering made-to-order or custom-made housings in Thailand, please consult us.

After machining overall surface area amount of the durty. such as oil, anti-rust oil, dust, metal chip and other contaminants. fine metal particles adheres to the surface of the work pieces right after processing. For example, oils can be surface pretreatment bychemicals, But scale and other contaminants can't wash to be completely. The pretreatment process is cleaned and prepared to be coated. There are two main types: "degrease cleaning" that removes dirt and grease from metal, and "zinc phosphate treatment" that makes a coating hard-to-peel-off by covering it with a special film which greatly improves corrosion resistance and adhesion. We select the most suitable treatment method according to the material and purpose, and promise a beautiful surface finish. For degreasing treatment in Thailand, please provide it to us.

If we are recieved with drawings such as CAD data, we will create an expansion diagram using 3D CAD. Moreover, even if there are no drawings, it is possible for us to ask the customer for images and designs. If you are interested in sheet metal forming with excellent quality and at a reasonable cost, please contact us. From planning and designing to completion, we provide one-stop support in Thailand.

We are handling custom-made and made-to-order containers for storage in an industrial facility. It can be selected from two types according to the customer’s purpose and request. ① Containerization type ■ Custom-made steel box based by containerization design ■ Free design is possible even for other sizes than the standard size ■ Excellent strength and cost performance ② Cubicle type ■ Full-order steel box ■ Can be designed according to the required size ■ Can be assembled at site. Installation on narrow land or on mountains poses no problem In both cases, the internal layout can be designed freely. In addition, we also manufacture storage containers for inverters, batteries, transformers, generators, etc. If you are seeking a containerization for an industrial facility in Thailand, please consult us.

Shot blasting is a surface processing that uses compressed air or centrifugal force to project a fine abrasive called shot onto the work pieces to remove burrs and rust. It is possible to blast big-size parts and large quantities of products. For the shot, We used steel grit (SAE-G 80GH) or steel shot (SAE-S 110). We are fully equipped with a line that incorporates shot blasting in the pretreatment process. If you would like shot blasting treatment in Thailand, please consult us.

We support the cutting metals of various materials and thicknesses. For example, use a punch press for thicknesses of 0.8 to 3.2 mm, or a fiber laser cutting machine for thick materials of 2.3 to 16 mm. Only a few companies in Thailand own such a laser cutting machine that can cut this thickness. For inquiries regarding sheet metal cutting in Thailand, please contact us.