For spindle centering of small-diameter tools! ‘Mowidec-TT’, a spindle centering system for automatic lathes manufactured by WIBEMO of Switzerland, enables quick and easy setup.

30/07/2021

Toshikazu Watanabe

Director

In machining where high precision is required, spindle centering (accurately aligning the center position) is extremely important when mounting cutting tools on automatic lathes.

YKT (Thailand) imports and sells in Thailand the spindle centering system manufactured by “WIBEMO” of Switzerland, which can be recommended to customers as digital units that can be set easily and centers spindles accurately.

Mowidec-TT manufactured by WIBEMO of Switzerland

▲“Mowidec-TT" manufactured by WIBEMO of Switzerland

The most important features of WIBEMO's Mowidec-TT are
1. High-precision spindle centering of small-diameter tools
2. Quick and easy spindle centering.

Features of Mowidec-TT
- High precision：Accurate measurement in micro units
- Excellent operability：Easy operation due to its simple design
- High speed measurement：Measurement and adjustment are done in just a few minutes
- High adaptability：Compatible with any lathe machine including those made by Citizen, Star Seiki and Tsugami

Higher accuracy is required for the spindle centering of a small-diameter tool

When turning with small and thin tools, it is quite difficult to accurately align and center the tip of the dial gauge. Using small-diameter tools means "machining with high precision”. In other words, a firm and accurate setup is required. Adjusting tools accurately is tricky and takes a certain amount of time to set up. This leads to "machine stoppage = production stoppage," which causes a major loss. This product is a revolutionary tool that can solve these problems.

High-precision automatic measuring equipment for lathes recognized by major Japanese companies in lathe machining

Our customer, E&H Precision (Thailand) Co., Ltd. has one of the largest lathe machining plant in Thailand with over 700 lathes, and was looking for quality measuring equipment for automatic lathes. The “Mowidec-TT” has become an indispensable part of the company's machining operations because of its high-quality finish, accuracy, and quick spindle centering.

WIBEMO SA

WIBEMO SA
Montchemin 12, CH-2832 Rebeuvelier, Switzerland
In addition to manufacturing a variety of products including cutting tools, the company also has its own lathe machining equipment and performs contract machining. Because it does lathing by itself, the company develops products from the user's perspective, and this easy-to-use spindle centering tool was born. The company’s culture is so friendly that the president of WIBEMO himself welcomed us when we visited the company for the first time.

If you have any spindle centering issues in Thailand, or if you are interested in Wibemo's spindle centering system, please feel free to contact YKT (Thailand) using the form below.

Inquiry Form

Please feel free to contact us from the form as below.

We accept by phone and email.

Name Required

Company Name

Phone number

Email Required

Message Required

KOA-SHA (THAILAND) (hereinafter referred to as the "Company" or "We"), in the variety of services provided by the Company (hereinafter referred to as the "Services"), established the following privacy policy (hereinafter referred to as the "Policy").

Definition of Personal Information: The term "Personal Information" as used in this Policy, means information about a living individual which can identify the specific individual, including name, date of birth, and other descriptions (including other information that can be easily matched to identify a specific individual).

Acquisition of Personal Information: We acquire personal information by legally fair means.

Use of Personal Information

The Company shall use personal information for the purpose of business as necessary within the scope of the following.

To deliver optimized information to the individual user of the Service.
To help improve the quality of the Service by statistical analysis.
In response to inquiry in regard to the Service.
To conduct questionnaires regarding the Service.
To send information regarding campaigns and new products by the Company.
Other purposes associated with the abovementioned purposes of use.

About cookies: The Company makes use of cookies on the Service website. In addition, cookies may be used in a portion of the advertising system. A cookie is a small amount of data regarding usage history that is sent to your browser from a website’s server and is stored on the user’s hard drive. If the user prefers the Company not to make use of cookies, the user can set their browser to reject cookies. However, if the cookies are rejected, there is a possibility that the use of the Service on the website will be affected.

Provision of Information to Third Parties

The Company will not provide personal information to any third party without obtaining prior consent by the individual concerned, except as required by applicable laws and regulations.

In addition, the Company may access personal information and disclose it to third parties in the following cases.

Under Prior Consent of the Individual User Concerned
When the disclosure of personal information is required by law or judicial court, judicial orders, decisions and instructions based on laws and regulations of government agencies.
When reasonable measures are necessary to defend the rights or property of the Company.
When the disclosure of personal information is necessary to protect the lives, bodies or property of the Company, user(s), or public, and it is difficult to obtain the individual’s consent at the time.
When cooperation is necessary with a national or local government organization, or a business operator entrusted by such an organization in executing affairs under laws and regulations, and in which obtaining the consent of the user(s) is likely to impede the execution of the affairs.
In statistical data in which the disclosure or provision does not identify the user’s identity.

Management of Personal Information

The Company will maintain the accuracy of personal information and manage it safely.
The Company will take appropriate security measures to prevent the loss, destruction, tampering or leakage of personal information.
The Company will take precautionary measures against the loss, destruction, tampering, and leakage of personal information through appropriate system maintenance of the operating system and education of employees.

Request for Notification, Disclosure, Correction, Suspension of Use of Personal Information

In the case the Company receives request from the individual user regarding the disclosure, correction, addition, deletion, suspension of use, or erasure of personal information, stoppage of use by a third party or notification of use, after confirmation that the requester is the individual user, the Company will respond without delay in accordance with the Personal Data Protection Act.

Note that in the case that the request does not meet the requirements stipulated by the Personal Data Protection Act, or the reason to reject such request is permitted by the Personal Data Protection Act or other laws and regulations, the request may not be fulfilled.

In addition, there is no payment required or fees associated with the request for disclosure by the individual user. However, the cost of communication from the individual user to the Company, transportation expenses, and expenses associated with the preparation of materials for the purposes of individual identification will be the responsibility of the individual user.

Revision of Privacy Policy: The Company will review the operational status of the handling of personal information and make efforts for continuous improvement, and may change the Policy as necessary. After such changes to the Policy, the Policy will be published on the Company’s website.