Water Jet Cutter / Ultrahigh Pressure Water Cutting Equipment

Water pressurized up to a maximum of 600 MPa (about 6,000 atm) is jetted from a small diameter nozzle. "Water Jet Cutter" is an equipment that cuts with ultrahigh pressure water flow. There are two methods: "water jet cutting" that machines only with water and "abrasive jet cutting" that mixes abrasives. Since it does not affect the properties or quality of the materials, it can be used for metal, glass, wood, stone, rubber, paper, etc., as well as food. It is a cutting technology that is drawing attention in many industries.

The water jet cutter of SUGINO MACHINE has special advantages such as the following:
■ Realizes high-precision nozzle control of ± 50 °. Supports machining of 3D complex shapes
■ Realizes precision machining with ultra-fine elastic nozzles, and greatly improves surface
roughness *
■ Automatically controls the angle of incidence of the nozzle. Realizes a vertical cut surface
■ Automatic control of cutting delay of cut surface. No shape defect at the corner part * For 5-axis control specification machine)

▲VARUNA

Features of water jet cutting

- Non-contact machining to prevent material deformation
- Machining is possible if there is a minimum cutting allowance of 0.3 mm
- Supports free-shaped machining such as three-dimensional shapes
- Supports machining of all kinds of materials
- Machining of thick plates with a thickness of 100 mm or more is possible.
- No dust scattering