PRODUCTS

A high-pressure washing machine using a water jet is suitable for cleaning parts and deburring. In addition to being able to be used for various materials, it is also possible to clean parts with complex shapes, contributing to the stabilization of work quality. Moreover, since cleaning is performed with a small amount of water, there is an advantage that running costs can be reduced. We have a wide variety of high-pressure water washing machines to suit customers’ applications.

The compact and highly accurate self-center has a wide range of centered on the easy-to-use # 30. h5 { font-size: 13px; line-height: 1.5em; margin-top: -1em; } p {margin-bottom: 1.25em; line-height: 1.9; }

Drilling screws have a drilling function (cutting edge) at the tip and can perform pilot drilling, tapping and tightening. From mass production of single products to high-mix production, our drilling units can be customized according to the usage and cost.

Tapping is the machining to carve a thread inside the hole to tighten a male screw that has a thread on the outer surface. The combination of this male screw and female thread determines the degree of tightening, so accuracy and precision are required. We have developed a tapping unit by combining many years of technology and know-how. The servo series is ideal for high-precision tapping.

Sugino Machine's "SUPEROLL" is a tool that crushes the unevenness of metal surfaces and finishes them smoothly. The rolling compaction by roller improves not only the surface roughness but also the fatigue strength and wear resistance of metals. Depending on the machining conditions, it is possible to correct the diameter by several µm.

The biggest feature of Barriquan is the built-in floating mechanism. The tip of the tool expands and contracts up and down by 10 mm, allowing the tool to be pressed against the workpiece at a constant pressure. This prevents burrs from being left behind and workpieces that have been scraped too much, and even removes burrs even for workpieces with complex shapes, contributing to the automation of deburring! We have a lineup of tool holder types for machining centers and spindle motor types for

The "BRQ-EL01" is a spindle motor unit that automates the deburring process for cast parts, particularly suited for removing burrs along the parting line (jointed surface) of aluminum and iron castings. It eliminates the quality inconsistencies of manual deburring, ensures uniform finishing, and promotes automation and efficiency in the workplace.

Water pressurized up to a maximum of 600 MPa (about 6,000 atm) is jetted from a small diameter nozzle. "Water Jet Cutter" is an equipment that cuts with ultrahigh pressure water flow. There are two methods: "water jet cutting" that machines only with water and "abrasive jet cutting" that mixes abrasives. Since it does not affect the properties or quality of the materials, it can be used for metal, glass, wood, stone, rubber, paper, etc., as well as food. It is a cutting technology that is drawing attention in many industries. The water jet cutter of SUGINO MACHINE has special advantages such as the following: ■ Realizes high-precision nozzle control of ± 50 °. Supports machining of 3D complex shapes ■ Realizes precision machining with ultra-fine elastic nozzles, and greatly improves surface roughness * ■ Automatically controls the angle of incidence of the nozzle. Realizes a vertical cut surface ■ Automatic control of cutting delay of cut surface. No shape defect at the corner part * For 5-axis control specification machine)

A “plunger-type pump" that reciprocates a plunger (rod-shaped piston) in a cylinder to cause a volume change to suck in and discharge liquid. Due to its structure, it generates high pressure. Our pump can stably supply high pressure and ultrahigh pressure water. In addition to the pump itself, various pump units (motor-driven, engine-driven) equipped with Sugino Pumps are also sold in Thailand. For further details, please contact us.