PRODUCTS

Stable generation of 30 liters per hour of strong alkaline ionized water with less impurities with pH 12.5 at 20 ℃. The unique generation system produces only strong alkaline ionized water at pH 12.5 or higher but it doesn't produce acid water. It provides deodorant, antibacterial effect and excellent detergency. It is more environmentally friendly than detergent and effective as a cleaning agent for processed workpieces and cooling water.

Much of the oil mist generated from machines is a hazardous substance, polluting production sites and exposing operators to danger. Filtermist collects oil mist released into the air, returns it to liquid form and refluxes it to a machine. It helps maintain on-site hygiene, safety and energy savings. It is also easy to maintain because the structure is simple. It collects the oil mist generated from machines and the particles of the mist stuck on special characteristics drum pad attached on the surface of the ultra high speed rotating feather in the drum, gradually becoming lumps. It hits the inner wall of the drum by centrifugation, falls into the drain, and it reverts the oil as liquid to a machine. It has a simple structure. It is an ECO & SAFETY item because it can collect a lot of mist with a very efficient and relatively small motor. The structure is simple, so maintenance is easy. It also maintains performance at low maintenance cost.

Magnet separator FINE MAG has improved sludge recovery capability significantly and also throttling performance to remove moisture from sludge. It also extends life of the coolant processing liquid, while reducing the maintenance frequency of the tank. It prevents breakdown of processing machines and reduces running cost of secondary processing equipment.

ViruClear is a device for making slightly acidic hypochlorite water, which is close to the pH of the human body, safe and highly effective in sterilization, and is now commonly used in hospitals in Japan. Using a unique carbon dioxide gas mixing method, it can safely and inexpensively generate a large capacity of 300 liters per hour of slightly acidic (pH 5-6.5) hypochlorite water "ViruClear Water" with a high effective chlorine concentration of 200 ppm. Viruclear Water is 80 times more effective at sterilize viruses and bacteria than ordinary kitchen bleach (sodium hypochlorite solution) with the same chlorine concentration. The National Institute of Technology and Evaluation (NITE), a public research organization in Japan, has also completed an evaluation of the sterilization capability of the product against the new coronavirus, and it has been proven that the virus is inactivated by more than 99.99% in 20 seconds of exposure to hypochlorite water of about 35 ppm. ＊1 h5 { font-size: 13px; line-height: 1.5em; margin-top: -1em; } p {margin-bottom: 1.25em; }

The ultrasonic atomizer "ViruClear Atomizer" is a device that atomizes liquids used for various applications into a mist (as extremely fine particles) by ultrasonic waves using piezoelectric ceramics. The atomized particles are much finer than those of ordinary humidifiers, and the feature is that it can be used without any problems even with weakly acidic hypochlorite water, which cannot be used with other ultrasonic humidifiers. The ViruClear Atomizer efficiently atomizes weakly acidic hypochlorite water that can safely sanitize odor-causing substances, bacteria, and viruses, allowing it to diffuse quickly and float in the air for a long time. It also maximizes the surface area per amount released with each spray, which efficiently promotes sterilization and deodorization. It is widely used in humidification and atomization experiments conducted at universities and research institutes, as well as in medical care facilities. h5 { font-size: 13px; line-height: 1.5em; margin-top: -1em; } p {margin-bottom: 1.25em; }

Heimatec is a world well-known tool application manufacturer. The structure developed by original technology brings out high rigidity and accuracy. We will also offer a wide lineup in Thailand. The tooling of Heimatec will make your request "I want such a tool" into reality.

The live tool for compound processing focused on Swiss style CNC lathe has provided support for multiple models. PCM products have a good reputation in highly precise composite processing and process & cycle time reduction. Bearings and sealing are powerful so that its structure is very resistant to breakage. It is used in various processing sites such as a triple speed machining, a multi-axis machining, an angle machining, and a hobbing.

The tooling developed by original technology realizes high accuracy and high efficiency in cutting processing. Especially, holders using hydraulic clamps absorb vibration of cutting, contributing to the extension of tool life and improvement of surface roughness. Regarding polygon processed polyturn, high rigidity holder using superalloy achieves clear surface roughness.

QUICK, the original cutting knurl, is the world's leading knurling tool maker with 60 years of history. It covers every pattern with the world's largest lineups and exceeds customer's expectations. We are the exclusive suppliers in Thailand and No. 1 in quality.

It is a screw rolling tool which is used while attached to a processing machine such as an NC lathe, multi-axis lathe and machining center. A screw will increase its strength when it's produced by rolling. In addition, it has higher stability in processing and its lifetime is far longer than cutting, which greatly reduces setup time and running cost.

The JBO screw rolling die is an efficient tool to instantly shape small diameter screws. Without having burrs and cracks like in cutting processing, it improves screw strength and surface roughness. Because it produces by rolling at the center of a 3 point roll, stable molding can be done with long screws. Due to single-shot processing by pitch feed, cycle time can be shortened.

It improves surface roughness by tracing the surface of the work after turning and eliminating cutting marks. We can solve your problems when finishing chips alone can not ensure surface roughness stability or finishing chips scratch products. Compared to cutting, the processing load is small, and wear of tools can be reduced.

PCM's rotary broaching tool is for broaching a polygonal hole attached to a Swiss-type or turret-type CNC lathe. Hexagon and torque shapes are treated as standard products. The process shortening can be achieved by incorporating a process of pressed punching into a lathe machine.

Buyer high speed deburring tool (HSD) is a deburring tool for crossholes incorporating a new principle. Deburring work with a lot of intersecting holes requires considerable time to finish, but it can greatly shorten processing time with one pass. The process can be shortened by automation with a machining center or CNC lathe.

It is a deburring tool for crossing holes which is used while attached to a machine with a drilling mechanism. It has a tweezers-shaped tip with a blade and is inserted in the crossing hole while rotating. Then, it removes burrs on the front and back with one pass. Because there are few malfunctions, it can be used as a tool for unattended operation without assigning any operators.

Marking (stamping) is used as quality assurance of high-priced products such as watches and cameras and individual management of equipment related to public utility fee collection. We realize a stable engraving process with the highest quality engravings and unique punching mechanism that we have cultivated through experience of vehicle number and engine number embossing. It is possible to manufacture anything from a special order stamping to a regular stamping equipment by in-house operation.

TECHNIFOR by GRAVOTECH group which has installed more than 40,000 units of machines in Thailand and all over the world, and has more than 30 years of history in the design of industrial traceability systems. The laser marking system guarantees safe, fast and high quality marking. It meets world industrial standards and is easy to install into a new or current production line. It is also possible to automate and helps toreduce operation time and cost.

TECHNIFOR brand by GRAVOTECH, which is credited in marking field around the world. Dot-pin system which directly marks on the surface of products, achieving legible and indelible marking. They have a desktop model which easily fits into a working space and portable model which is light and easy to operate. Various functions such as 2D code marking contribute to traceability improvement.

Assembling leading edge know-how, it makes reading of direct marking, which has been recognized as being difficult, possible. With a large reading window, it doesn’t miss reading-hard 2D symbols. Lighting is also controllable corresponding to workpieces, and it gets users away from time-consuming tuning.

Handjet is a handy type inkjet marker developed in the EBS company in Germany. It is stress-free to carry with a built-in battery and ink cartridge and is very lightweight. With data input by bluetooth bar code reader and operation speed detection function by encoder, it is possible to make a clear marking without any errors.

Traceability is an indispensable mechanism to promptly identify the causes of defects. Also, it is a very important mechanism to provide maximum consumer security with minimal cost. By choosing the best option from any possible marking solutions and collaborating with leading makers and system design companies, we will provide a reliable one-time traceability system in the most efficient way.